2 November 2021

[Perovskite] – 3D-printing of perovskite nanostructures.

Home > News > [Perovskite] – 3D-printing of perovskite nanostructures.
Flèche contenu
Perovskite nanostructure - codex International

Organic–inorganic metal halide perovskites have emerged as a promising optoelectronic material with exceptional structure and property tunability. This new generation of functional materials possess excellent properties such as large optical absorption, long carrier diffusion length, high carrier mobility, and low-cost solution production process.

The research attention in metal halide perovskites has grown exponentially since 2009, when the use of organometal halide perovskites as visible-light sensitizers for photovoltaic cells was reported (JACS, “Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells”).

In the decade since, a rapidly growing body of research has utilized perovskites for applications as solar cells, photodetectors, light emitting diodes, and lasers.

In recent years, structure control of organic–inorganic metal halide hybrids has been explored to lower the dimensionality from 3D to 2D, 1D, and 0D at both morphological and molecular levels (see for instance: “Ultrathin perovskite nanocrystals suitable for use in tunable and energy-efficient LEDs” or work on light-emitting nanoantennas based on halide perovskites).

At the same time, fabrication methods based on inkjet printing emerged for patterning such perovskite micro- and nanostructures. However, these patterning techniques for perovskites are still limited to in-plane fabrication and alignment.

To overcome this limitation, researchers have developed a method to print perovskite nanostructures in three dimensions. The method exploits a femtoliter meniscus of precursor ink formed on a nanopipette to localize and guide solution-mediated perovskite crystallization in mid-air, enabling nanoscale and freeform 3D printing.

The researchers, led by a team from the Department of Mechanical Engineering at The University of Hong Kong, have published their findings in Advanced Materials (“3D Nanoprinting of Perovskites”).

As illustrated in the above figure, the perovskite crystallization inside the fL ink meniscus is driven by fast evaporation of DMF solvent. At a given steady-state geometry of the fL meniscus, as shown in the inset, the evaporative loss of solvent directly increases the concentration of perovskite solutes at the meniscus surface because the solutes do not evaporate into the air.

The researchers explain that steering the crystallization in three dimensions is based on moving the nanopipette with a motorized stage (see video below): “When an ink-filled nanopipette with a diameter of 600 nm approaches and physically contacts a Si substrate, fL-volume ink is wetted on the substrate, forming the meniscus at the pipette–substrate gap. CH3NH3PbI3 crystals immediately start to grow inside the ink meniscus.”


Discover Also
[Optic] – Living optical fibers expand the use of photonics for bioengineering. 26 October 2021

Glass is one of the oldest manufactured materials used by humans and glass making dates back at least 6000 years, long before humans had discovered how to smelt iron…

Read more
[Nanotechnology] – Nanomaterials to boost the body’s natural defenses 12 November 2019

When a person gets sick, the invading virus or bacteria often triggers an immune response, sending a wave of white blood cells to attack the source of the illness. While the body’s natural defenses can often dismantle the infection, the immune reaction can sometimes cause more harm than intended.

Read more